The new 'MR Safe': Language changes for the FDA

2005 10 26 13 09 47 706

For years the U.S. Food and Drug Administration (FDA) has been struggling with a vocabulary problem. The current definition of "MR Safe" is limited to objects that don't get sucked into the bores of magnets. However, if a particular ladder, pump, or wheelchair is determined safe for a 0.35-tesla open MRI system, it isn't necessarily safe in a 3-tesla MRI, or even a 1.5-tesla system. And MR Safe may apply to certain gradients or sequences, but not others. MR Safe may have been deemed safe outside the 50-gauss line, but not inside it. In short, there is nothing definitive about an object being classified as MR Safe, which has led to tremendous confusion.

There's also nothing about the term MR Safe that leads you to believe that there are conditions attached. That and the seeming absoluteness of the term have led many to misuse the language. That's all about to change.

ASTM International (formerly the American Society for Testing and Materials, now known solely by their acronym), the body that developed the testing standards for the current MR Safe and MR Compatible, is now revising its language. The proposed new terminology has three classifications: MR Safe, MR Conditional, and MR Unsafe.

The proposed new language

2005 10 26 13 09 33 706The new MR Safe will adhere to a much higher standard and will be, as many have mistakenly been using the current term, absolute. To obtain the new MR Safe designation, an object must be completely free of metallic components. It must also be completely nonconductive, and not radiofrequency (RF) reactive. Everything that receives the new MR Safe designation must be equally safe at all field strengths, gradients, and sequences."

Ultimately, objects or devices receiving the new MR Safe designation must be safe from RF heating, induced magnetic currents, rotational (torque) effects, or translational forces (missile effect).

According to Dr. Emanuel Kanal, who has worked with ASTM and the FDA to develop the new language and standards, "the only way an object with the proposed new MR Safe designation could hurt a patient (in an MR environment) would be if you threw it at them."

Objects getting the new designation will have to be fabricated very carefully from nonconductive materials such as rubber, plastics, ceramics, select polymers, wood, and fiberglass.

ASTM also proposes that vendors that can demonstrate that its products are made from accepted nonconductive materials will not have to undergo expensive testing and certification for the new MR Safe designation. No amount of scrutiny or testing will improve the MR safety of a rubber ball, so why squander the resources to do so?

2005 10 26 13 09 47 706But the bulk of objects, including most contemporary medical implants and devices, will receive the MR Conditional designation. This means that the object or device is safe under certain tested conditions, and those conditions should be enumerated on the product, its packaging, or in the enclosed literature. If the ASTM has its way, this safety standard would apply equally to mop handles as to pacemakers.

Nearly everything that carries either the current MR Safe or MR Compatible designations would be switched to MR Conditional under the new standard. Operational criteria that currently are explained in the definition of MR Compatible would become conditions for use and function under the new MR Conditional label.

2005 10 26 13 09 21 706The final category is virtually self-explanatory: MR Unsafe. Objects receiving this designation will be those known to pose hazards in all MR environments, such as ferromagnetic oxygen cylinders.

Additionally, the ASTM language eliminates any reference to magnet interference. This standard is to be exclusively about safety.

Currently, this is simply an ASTM proposed standard with no authority, but that won't last long. ASTM is developing this standard with the cooperation of the FDA; when completed, the agency will either reference the standard as is -- codifying the ASTM standard into the body of FDA regulations -- or use the ASTM language as a jumping-off point for its own standard.

Whatever road the FDA ultimately chooses, this revision holds the promise of making the language of MRI safety more coherent, logical, and intuitive, which can only serve to improve the application of safety principles.

In addition to identifying the safety of all objects that can be brought into the MRI suite, a proper MRI suite should also provide a secured quarantine area for MR Conditional and MR Unsafe items. If your facility doesn't have such an area, seek out expert advice to help you create one.

By Tobias Gilk
AuntMinnie.com contributing writer
October 27, 2005

Reprinted from www.mri-planning.com by permission of the authors. If you would like more information on any aspect of MR facility design or safety, please contact Robert Junk or Tobias Gilk at Jünk Architects.

Related Reading

Cost of MRI mishaps makes safety investment profitable, October 14, 2005

Interim trailer leasing: The hidden cost of MRI suite renovations, September 28, 2005

A shocking story of MRI static discharge, September 21, 2005

DI in the OR: The advent of intraoperative imaging, August 31, 2005

Modular done wrong: a $3 million barnacle, August 22, 2005

Copyright © 2005 Jünk Architects, PC

Page 1 of 605
Next Page